1 http://www.fujielectric.com/products/semiconductor/ 2MBI150VB-120-50 igbt modules igbt module (v series) 1200v / 150a / 2 in one package features high speed switching voltage drive low inductance module structure applications inverter for motor drive ac and dc servo drive amplifer uninterruptible power supply industrial machines, such as welding machines maximum ratings and characteristics absolute maximum ratings (at t c =25c unless otherwise specifed) items symbols conditions maximum ratings units collector-emitter voltage v ces 1200 v gate-emitter voltage v ges 20 v collector current i c continuous t c =100c 150 i c pulse 1ms 300 -i c 150 -i c pulse 1ms 300 collector power dissipation p c 1 device 1070 w junction temperature t j 175 c operating junction temperature (under switching conditions) t jop 150 case temperature t c 125 storage temperature t stg -40 ~ 125 isolation voltage between terminal and copper base (*1) v iso ac : 1min. 2500 vac screw torque mounting (*2) - 3.5 n m terminals (*3) - 3.5 note *1: all terminals should be connected together during the test. note *2: recommendable value : 2.5-3.5 nm (m5 or m6) note *3: recommendable value : 2.5-3.5 nm (m5) electrical characteristics (at t j = 25c unless otherwise specifed) items symbols conditions characteristics units min. typ. max. zero gate voltage collector current i ces v ge = 0v, v ce = 1200v - - 2.0 ma gate-emitter leakage current i ges v ce = 0v, v ge = 20v - - 400 na gate-emitter threshold voltage v ge (th) v ce = 20v, i c = 150ma 6.0 6.5 7.0 v collector-emitter saturation voltage v ce (sat) (terminal) v ge = 15v i c = 150a t j =25c - 2.00 2.45 v t j =125c - 2.35 - t j =150c 2.40 v ce (sat) (chip) v ge = 15v i c = 150a t j =25c - 1.85 2.30 t j =125c - 2.20 - t j =150c 2.25 internal gate resistance r g (int) - - 5.0 - input capacitance c ies v ce = 10v, v ge = 0v, f = 1mhz - 12.0 - nf turn-on time t on v cc = 600v l s = 30nh i c = 150a v ge = 15v r g = 4.2? t j = 150c - 600 - nsec t r - 200 - t r (i) - 50 - turn-off time t off - 800 - t f - 80 - forward on voltage v f (terminal) v ge = 0v i f = 150a t j =25c - 1.85 2.30 v t j =125c - 2.00 - t j =150c 1.95 v f (chip) v ge = 0v i f = 150a t j =25c - 1.70 2.15 t j =125c - 1.85 - t j =150c 1.80 reverse recovery time t rr i f = 150a - 150 - nsec thermal resistance characteristics items symbols conditions characteristics units min. typ. max. thermal resistance (1device) r th(j-c) igbt - - 0.140 c/w fwd - - 0.200 contact thermal resistance (1device) (*4) r th(c-f) with thermal compound - 0.025 - note *4: this is the value which is defned mounting on the additional cooling fn with thermal compound.
2 igbt modules 2MBI150VB-120-50 http://www.fujielectric.com/products/semiconductor/ 3 characteristics (representative) collector current vs. collector-emitter voltage (typ.) t j = 150c / chip collector-emitter voltage vs. gate-emitter voltage t j = 25c / chip collector current vs. collector-emitter voltage (typ.) t j = 25c / chip collector current vs. collector-emitter voltage (typ.) v ge = 15v / chip gate capacitance vs. collector-emitter voltage v ge = 0v, ?= 1mhz, t j = 25c dynamic gate charge (typ.) v cc =600v, i c =150a, t j = 25c 0 50 100 150 200 250 300 350 0 1 2 3 4 collector-emitter voltage: v ce [v] co ll e c t or curren t: i c [ a ] 125c t j = 25 c 150c 0 2 4 6 8 10 5 10 15 20 25 gate-emitter voltage: v ge [v] co ll e c t or- e m i tt er v o l t age : v ce [ v ] i c =300a i c =150a i c =75a 0 50 100 150 200 250 300 350 0 1 2 3 4 5 collector-emitter voltage: v ce [v] c o ll e ct o r c u rr en t: i c [a ] v ge =20v 15v 12v 10v 8v 0 50 100 150 200 250 300 350 0 1 2 3 4 5 collector-emitter voltage: v ce [v] c o ll e ct o r c u rr en t: i c [a ] v ge = 20v 15v 12v 10v 8v 0.1 1 10 100 0 10 20 30 collector-emitter voltage: v ce [v] ga t e capa c i t an c e : c ies , c oes , c res [ nf ] ** * c ies c oes c res -20 -15 -10 -5 0 5 10 15 20 -1.5 -1.0 -0.5 0.0 0.5 1.0 1.5 gate charge: q g [ c] g a t e- e m i tt er v o l t age : v ge [ v ] -800 -600 -400 -200 0 200 400 600 800 co ll e c t or- e m i tt er v o l t age : v ce [ v ] v ge v ce
2 3 igbt modules 2MBI150VB-120-50 http://www.fujielectric.com/products/semiconductor/ reverse bias safe operating area (max.) +v ge =15v, -v ge =15v, r g =4.2?, t j =150c switching time vs. collector current (typ.) v cc =600v, v ge =15v, r g =4.2?, t j =125c switching loss vs. collector current (typ.) v cc =600, v ge =15v, r g =4.2?, t j =125, 150c switching time vs. gate resistance (typ.) v cc =600v, i c =150a, v ge =15v, t j =125c switching time vs. collector current (typ.) v cc =600v, v ge =15v, r g =4.2?, t j =150c switching loss vs. gate resistance (typ.) v cc =600v, i c =150a, v ge =15v, t j =125, 150c 10 100 1000 10000 0 100 200 300 400 collector current: i c [a] s w itc h i ng tim e : t on , t r , t off , t f [ n s e c ] t off t on t r t f 10 100 1000 10000 1 10 100 gate resistance: r g [?] s w itc h i ng tim e : t on , t r , t off , t f [ n s e c ] t off t on t r t f 0 50 100 150 200 250 300 350 0 400 800 1200 1600 collector-emitter voltage: v ce [v] (main terminals) c o ll e ct o r c u rr en t: i c [a ] 0 10 20 30 40 50 60 1 10 100 gate resistance: r g [?] s w i tc h i ng l o s s: e on , e off , e rr [ m j/ pu l s e ] e off e rr e on t j =125c t j =150c 0 10 20 30 0 100 200 300 400 collector current: i c [a] s w i t c h i ng l o s s: e on , e off , e rr [ m j/ pu l s e ] e on e off e rr t j =125c t j =150c 10 100 1000 10000 0 100 200 300 400 collector current: i c [a] s w itc h i ng tim e : t on , t r , t off , t f [ n s e c ] t off t on t r t f
4 igbt modules 2MBI150VB-120-50 http://www.fujielectric.com/products/semiconductor/ 5 v cc =600v, v ge =15v, r g =4.2?, t j =150c transient thermal resistance (max.) reverse recovery characteristics (typ.) v cc =600v, v ge =15v, r g =4.2?, t j =125c forward current vs. forward voltage (typ.) chip reverse recovery characteristics (typ.) fwd safe operating area (max.) t j =150c 10 100 1000 0 100 200 300 400 forward current: i f [a] t rr i rr 0.001 0.01 0.1 1 0.001 0.01 0.1 1 pulse width : p w [sec] t her m a l re s i s t an s e : r th(j-c) [ c / w ] ** * fwd igbt 0 50 100 150 200 250 300 350 0 1 2 3 forward on voltage: v f [v] f o r wa r d c u rr en t: i f [ a ] 125c t j =25c 150c 10 100 1000 0 100 200 300 400 forward current: i f [a] t rr i rr 0 100 200 300 400 0 500 1000 1500 collector-emitter voltage: v ce [v] (main terminals) re v e r s e re c o v e r y c u rren t: i rr [ a ] p max =180kw ( i ) [ s e c ] 0.0 0 1 0 .0 1 9 0 . 05 0 0 . 06 3 r t h ( i ) i g b t 0.01 3 1 6 0.03 1 2 9 0 . 0539 7 0 . 0418 8 [ c / w ] f w d 0 .01 8 8 0 0.04 4 7 0 0 . 0771 0 0 . 0598 3 r e v er s e re c o v er y c urren t : i rr [a ] r e v e r s e r e c o v e r y t i m e : t rr [ n s e c ] r e v er s e re c o v er y c urren t : i rr [a ] r e v e r s e r e c o v e r y t i m e : t rr [ n s e c ]
4 5 igbt modules 2MBI150VB-120-50 http://www.fujielectric.com/products/semiconductor/ c 1 c 2 e 1 e 2 e 2 g 2 e 1 g 1 c 1 c 2 e 1 e 2 e 2 g 2 e 1 g 1 outline drawings, mm equivalent circuit schematic
6 igbt modules 2MBI150VB-120-50 http://www.fujielectric.com/products/semiconductor/ warning 1. this catalog contains the product specifcations, characteristics, data, materials, and structures as of may 2011. the contents are subject to change without notice for specifcation changes or other reasons. when using a product listed in this catalog, be sur to obtain the latest specifcations. 2. all applications described in this catalog exemplify the use of fuji's products for your reference only. no right or license, either express or implied, under any patent, copyright, trade secret or other intellectual property right owned by fuji electric co., ltd. is (or shall be deemed) granted. fuji electric co., ltd. makes no representation or warranty, whether express or implied, relating to the infringement or alleged infringement of other's intellectual property rights which may arise from the use of the applications described herein. 3. although fuji electric co., ltd. is enhancing product quality and reliability, a small percentage of semiconductor products may become faulty. when using fuji electric semiconductor products in your equipment, you are requested to take adequate safety measures to prevent the equipment from causing a physical injury, fre, or other problem if any of the products become faulty. it is recommended to make your design failsafe, fame retardant, and free of malfunction. 4. the products introduced in this catalog are intended for use in the following electronic and electrical equipment which has normal reliability requirements. ? computers ? oa equipment ? communications equipment (terminal devices) ? measurement equipment ? machine tools ? audiovisual equipment ? electrical home appliances ? personal equipment ? industrial robots etc. 5. if you need to use a product in this catalog for equipment requiring higher reliability than normal, such as for the equipment listed below, it is imperative to contact fuji electric co., ltd. to obtain prior approval. when using these products for such equipment, take adequate measures such as a backup system to prevent the equipment from malfunctioning even if a fuji's product incorporated in the equipment becomes faulty. ? transportation equipment (mounted on cars and ships) ? trunk communications equipment ? traffc-signal control equipment ? gas leakage detectors with an auto-shut-off feature ? emergency equipment for responding to disasters and anti-burglary devices ? safety devices ? medical equipment 6. do not use products in this catalog for the equipment requiring strict reliability such as the following and equivalents to strategic equipment (without limitation). ? space equipment ? aeronautic equipment ? nuclear control equipment ? submarine repeater equipment 7. copyright ?1996-2011 by fuji electric co., ltd. all rights reserved. no part of this catalog may be reproduced in any form or by any means without the express permission of fuji electric co., ltd. 8. if you have any question about any portion in this catalog, ask fuji electric co., ltd. or its sales agents before using the product. neither fuji electric co., ltd. nor its agents shall be liable for any injury caused by any use of the products not in accordance with instructions set forth herein.
|
